Stay Protected from Bugs All Year-Round with Experienced Pest Control, Terminix
How To Start Your Garden Before Spring

How to Choose the Right Water System for Your Home

34870487656_1d1ec5853b_k

The water that is piped to our homes is hardly clean. This is because it gets contaminated as it goes through the pipes by metals, chemicals and disease causing bacteria. It’s therefore important for every homeowner to consider treating water before it’s used for domestic purposes. Treated water gives you the privilege of enjoying water that is crisp, refreshing and free from odors. You only need to invest in a water treatment system and you will never have to waste your money on bottled water. Most homeowners get confused when selecting a water purification system. This is due to the fact that there are several systems that are available in the market.

  1. Have Your Water Tested

It’s difficult to find a water treatment system that removes all the impurities. This is because different systems are designed to only eliminate certain kinds of impurities. If you rush into just buying any system, you might be shocked to find that it can’t remove the impurities that are in your tap water. To avoid wasting time and money, you should first have the water tested at the nearest municipal lab. If you are lucky, your municipal will give you results for tests that were carried out recently. You can also test the water at home. But you must buy a home test kit. The results you will get will guide you when shopping for water filters.

  1. Choose the Ideal System

There are basically three categories of water filters. The first group uses activated carbon to get rid of impurities such as copper, lead, mercury, pesticides and parasites. This kind of filter is commonly used in systems that are installed beneath the kitchen sink and water pitchers. If your water has been contaminated by chemicals that are used in dry cleaners, you have to get a system that uses reverse osmosis technology by making it go through a semipermeable membrane. However, if arsenic is present in your water, it can only be eliminated through distillation by boiling the water so that impurities can be left behind after evaporation. You should also by a system that has been approved by NSF.

  1. Select a Location for the Filter

You have to select where you want your system to be. You can install the treatment system at the point of entry so that the impurities are eliminated before the water reaches your house and storage tanks. If this is the kind of system that you want, you have to put your finances together because they are costly. Besides that, you must create extra space for such a system. You can also opt for point of use filters such as pitchers, faucet systems and undersink filters.

  1. Focus on Efficiency

Treatment systems that are installed below the sink are more reliable than filters that are found in pitchers. This is because there is a lot of pressure that’s pushing the water. The other advantage is that they don’t require any refilling because the water is purified as it flows through the tap. A pitcher has to be refilled on a regular basis or there will be no pure water when you need to quench your thirst. For more details on water treatment, please visit watersoftenergurus.com.

partnered post • cc-licensed image by Kamil Kaczor

Comments